Industrial PLC Bridge With Wi-Fi is developed by WonderTek Technology (KunShan) Co.,LTD., it supports the HomePlugAV2 and 802.11ac and It Can be used in DC or AC condition .The product has been widely used in many aspects just as railway, mines, industrial telecommunication and metro etc...
1.1 Highlight
1.1.1Technical parameters.
Support HomePlug and 802.11ac.
Industrial IP67 style installation.
The maximum transfer distance up to 800 meters.
Self-adapt the rate.
1.1.2 Manageability
Support Remote Firmware update(TR069).
802.3D Ethernet Bridge.
802.1Q VLAN.
Quality of Service(QoS) .
IGMO(IPv4)Snooping&MLD(IPv6)Snooping.
1.1.3Operating environment
Working temperature: -40℃-85℃.
Operating humidity: 10%-85% no condense.
Storage humidity:5%-90% no condense.
1.1.4 Design standards
HomePlugAV2
IEC 60529
IEC 50022
IEC 60068-2-6
IEEE 802.11ac
|
Model |
WD-F1200MH-G30 |
|
Interface |
2*LAN 10/100/1000Base-TX MDI/MDX support RJ45，1*AC power interface |
|
LED display light |
Ethernet, PLC link ,Power ,Wi-Fi |
|
Transfer frequency |
2-68MHz and 30-68MHz MIMO |
|
Protocol（PHY） |
IEEE802.3，IEEE802.3x, IEEE802.3u, HomePlugAV2, 802.11ac |
|
Security |
128-AES |
|
Transfer rate（PHY） |
1200Mbps |
|
Modulation |
OFDM |
|
Manageability |
Remote Firmware update，support TR-069（optional） |
|
802.1D Ethernet Bridge |
|
|
802.1Q VLAN |
|
|
Quality of Service(QoS) |
|
|
IGMO(IPv4)Snooping&MLD(IPv6)Snooping |
|
|
Working voltage |
AC 85V-520V |
|
Operating temperature |
-40℃-85℃ |
|
Size |
220*160*100mm（L×W×H） |
|
Weight |
1.15kg |
|
Operating environment |
Operating humidity:10%-85% (no condense) |
|
Storage humidity: 5%-90%(no condense) |
|
|
Certification |
FCC、CE class B,WEEE,RoHS |
1.2 Features
1.3 Immunity of ESD
The testing voltage which the device should be beared: ±6kV direct Discharge, ±8kV air discharge.
Discharge number in Each sensitive testing point: Plus-n-Minus 10 times each,
Every time the discharge interval is 1 s, according to B/T 17626.2-2006.
1.4 Immunity of electrical fast transient impulse group(Common mode)
The testing voltage which the device should be beared:
between the power supply voltage port and ground: ±2.0kV;
between signal circuit and ground: ±1.0kV;
repetition frequency: 5KHz;
test duration: 1 min/ time;
testing times: Plus-n-Minus 5 times each;
According to GB/T 17626.4-2008.
1.5 Anti interference of surge impact
The testing voltage which the device should be beared: ±2kV.
The interval of continuous impulses: 1min/time.
Test number: Plus-n-Minus 5 times each.
According to GB/T 17626.5-2008.(protection: all models protection and varistor series of discharge tube type)
1.6Anti- vibration
Meet the demand of MX3 in TB1433(0-200Hz,2g acceleration, maximum amplitude 7mm), interface with no loose, device with no Sealing off and drop in the test.
1.7 System topology
Learn more
